Ozone is produced from dried air or from oxygen at the desidered concentration, with electrodes in composite materials, at low voltage and high frequency.

This new line of ozone generators fully assembled and factory tested, includes mechanical, electrical, instrument fittings and air preparation when required.Because ozone may be produced from air or from oxygen, ozonisers need an air dryer system HA1.1 or an oxygen producing system PSA HP1.1. In both cases compressed air is necessary from the internal factory network or produced by compressors.

After its production; ozone must be introduced into the contact system (or process), this can usually be done with porous diffusers, with ejectors when the pressure is higher than that of the ozone generator or with other special systems. Finally an ozone destroying system DOT 1.1, is needed to remove the ozone that was not transferred to the contact basin.